30-3601_A-1200 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement units for the 30-3601_A-1200 model allow non-standard configurations of shaft diameter, flange design, and output signal types. Produced with precision in-house, these units are delivered within approximately 10 working days, offering rapid and reliable replacement solutions for industrial automation systems.
Product Review
The 30-3601_A-1200 incremental encoder features 1200 PPR output, delivering accurate incremental feedback for conveyors, robotic systems, and automated machinery. Its steel housing and reinforced shaft resist mechanical stress, while the IP65 enclosure protects against dust, water, and vibrations, making it suitable for harsh industrial environments.
Технічні дані
| Specification Category | Параметр | Деталі |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Параметр | Деталі |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Параметр | Деталі |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Параметр | Деталі |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
Відмова від відповідальності:
Весь контент на цьому сайті є оригінальним, якщо не вказано інше. Копіювання, збір або публікація будь-яких матеріалів без нашого дозволу заборонені. Якщо будь-який контент порушує авторські права, будь ласка, зв'яжіться з нами.
