We provide a precise 1:1 replacement for the ASM58N-F2AK1RHGN-1212 multiturn encoder, available with a 10-working-day lead time. The replacement is fully compatible with the original model’s mechanical and electrical characteristics, including the SSI communication protocol, pin layout, and hollow shaft configuration. This ensures straightforward installation and plug-and-play operation in existing setups.
Featuring 30-bit multiturn accuracy, the encoder transmits position data through a high-speed RS422 SSI interface with up to 2 Mbaud transfer rate. The optically isolated circuitry enhances data reliability, while the hardware encoder structure guarantees instant signal output synchronized to the control clock. With its durable build and vibration-resistant design, this encoder provides consistent performance in industrial automation and machinery environments.
Replacement solution image.
Technical data
| Parameter | Value |
|---|---|
| General specifications | |
| Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder |
| Electrical specifications | |
| Operating voltage | 4.5 ... 30 V DC |
| No-load supply current | max. 180 mA |
| Time delay before availability | < 250 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output code | Gray code, Binary code |
| Code course (counting direction) | cw descending (clockwise rotation, code course descending) |
| Interface | |
| Interface type | SSI |
| Monoflop time | 20 ± 10 μs |
| Resolution | - Single turn: up to 16 Bit- Multiturn: 14 Bit- Overall resolution: up to 30 Bit |
| Transfer rate | 0.1 ... 2 MB/s |
| Voltage drop | V |
| Standard conformity | RS 422 |
| Input 1 | |
| Input type | Selection of counting direction (cw/ccw) |
| Signal voltage | - High: 4.5 ... 30 V- Low: 0 ... 2 V |
| Input current | < 8 mA |
| Switch-on delay | < 10 ms |
| Connection | |
| Connector | type 9416 (M23), 12-pin, type 9416L (M23), 12-pin |
| Cable | 67 mm, 8 × 2.0 × 0.14 mm², 1 m |
| Standard conformity | |
| Degree of protection | DIN EN 60529, IP65 (without shaft seal); DIN EN 60529, IP66/IP67 (with shaft seal) |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
