Product Review
Built for demanding environments, the AVM78E-011KRA0GI-1416 multiturn absolute encoder provides explosion-proof safety and precise position monitoring. It is widely used in oil, gas, and mining operations where safety and reliability are critical.
Custom Replacement Solution
Our replacement encoder for the AVM78E-011KRA0GI-1416 is a non-standard customized solution, available with fast lead times of around 15 working days.
Technical Data for Multiturn Absolute Rotary Encoder AVM78E
General Specifications
| Attribute | Деталі |
|---|---|
| Detection Type | Photoelectric Sampling |
| Device Type | Multiturn Absolute Rotary Encoder |
| Functional Safety | MTTFd: 210 a, L10: 7.7 E+9 at 3000 rpm |
| Operating Voltage (U_B) | 10 … 30 V DC |
| No-load Supply Current (I_0) | max. 90 mA |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output Code | Gray Code, Binary Code |
| Interface Type | SSI (Synchronous Serial Interface) |
| Monoflop Time | 20 ± 10 µs |
| Resolution | Single Turn: Up to 16 Bit Multiturn: Up to 14 Bit Overall: Up to 30 Bit |
| Transfer Rate | 0.1 … 2 MBit/s |
Standard Conformity
| Attribute | Standard |
|---|---|
| Degree of Protection | DIN EN 60529, IP66 |
| Climatic Testing | DIN EN 60068-2-78, no moisture condensation |
| Emitted Interference | EN 61000-6-4:2007/A1:2011 |
| Noise Immunity | EN 61000-6-2:2005 |
| Shock Resistance | DIN EN 60068-2-27, 100 g, 3 ms |
| Vibration Resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz |
Approvals and Certificates
| Attribute | Деталі |
|---|---|
| ATEX Approval | Equipment protection level Gb, ITS 15 ATEX 18372X |
| IECEx Approval | Equipment protection level Gb, IECEx ITS 15.0061X |
Ambient Conditions
| Attribute | Range |
|---|---|
| Operating Temperature | -40 … 70 °C (-40 … 158 °F) |
| Storage Temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Attribute | Деталі |
|---|---|
| Material (Housing) | Anodized Aluminum, Stainless Steel 1.4404 / AISI 316L (Inox) |
| Material (Flange) | Anodized Aluminum, Stainless Steel 1.4404 / AISI 316L (Inox) |
| Shaft Material | Stainless Steel 1.4404 / AISI 316L |
| Mass | approx. 2600 g (combination 1), approx. 3900 g (combination 2) |
| Rotational Speed | max. 3000 min^-1 |
| Moment of Inertia | 180 gcm^2 |
| Starting Torque | ≤ 4 Ncm |
| Shaft Load | Axial: 60 N, Radial: 80 N |
Additional Information
| Attribute | Деталі |
|---|---|
| Material Options | - Housing: Anodized Aluminum - Flange: Anodized Aluminum - Shaft: Stainless Steel 1.4404 / AISI 316L - (Inox) All Stainless Steel |
| Shaft Dimensions | 12 mm x 25 mm with flats at 120° |
| Cable Connection | ∅ 10.2 mm, Radox 9 x 0.5 mm² |
| Terminal Compartment | Options available, see ordering information |
Відмова від відповідальності:
Весь контент на цьому сайті є оригінальним, якщо не вказано інше. Копіювання, збір або публікація будь-яких матеріалів без нашого дозволу заборонені. Якщо будь-який контент порушує авторські права, будь ласка, зв'яжіться з нами.
