RVI58X-011K1A61N-00100 Incremental Rotary Encoder Custom Replacement Model
We can supply a custom replacement for the RVI58X-011K1A61N-00100 incremental rotary encoder, with production completed in approximately 10–15 working days. This allows rapid replenishment for critical production lines. The replacement is fully compatible with the original encoder, ensuring seamless integration without additional setup.
This encoder is designed for versatile use in control systems where incremental position feedback is essential. Its six-channel output and flexible mounting options support diverse industrial environments. With plastic and glass pulse disks depending on pulse count requirements, the device provides accurate and stable performance. The unit is suitable for zone 2 and zone 22 installations, guaranteeing safe operation in hazardous areas.
Replacement model image below.
Technical Data
| Specification Category | Parameter | Details |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Pulse count | max. 5000 | |
| Functional safety related parameters | MTTFₐ | 140 a |
| L₁₀ | 70 E-9 at 6000 rpm | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | Operating voltage (UB) | 10 … 30 V DC |
| No-load supply current (I0) | max. 60 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (Ud) | < 3 V | |
| Load current | max. per channel 40 mA, short-circuit protected (not with UB), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Connection | Cable | ∅7.8 mm, 6 x 2 x 0.14 mm², 1 m |
| Standard conformity | Degree of protection | DIN EN 60529, IP64 |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Details |
|---|---|
| Operating temperature | Glass disk: -30 … 70 °C (-22 … 158 °F), cable, fixed installationPlastic disk: -30 … 60 °C (-22 … 140 °F), cable, fixed installation |
| Storage temperature | Glass disk: -30 … 70 °C (-22 … 158 °F)Plastic disk: -30 … 70 °C (-22 … 158 °F) |
Mechanical Specifications
| Parameter | Details |
|---|---|
| Material | Housing: powder coated aluminumFlange: AluminumShaft: Stainless steel |
| Mass | approx. 350 g |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | ≤ 25 gcm² |
| Starting torque | ≤ 1.5 Ncm |
| Shaft load | Axial: 40 NRadial: 60 N |
| Dimensions | Length: 50.5 mmDiameter: 58 mm |
Data for Hazardous Areas
| Item | Details |
|---|---|
| ATEX marking | ① II 3G Ex nA IIB T4 Ga X② II 3D Ex t IIIC T105°C Dc X |
| Certificate | PF 18 CERT 4775 X |
| Directive conformity | Directive 2014/34/EUEN IEC 60079-0:2018, EN 60079-15:2010, EN 60079-31:2014 |
