RVI58X-011K1A61N-02000 Incremental Rotary Encoder Custom Replacement Model
We offer a custom replacement model for the RVI58X-011K1A61N-02000 incremental rotary encoder. Manufactured within 10–15 working days, it provides a reliable solution to address urgent operational needs. The replacement matches the original product’s mechanical and electrical interface, ensuring seamless installation without additional modifications.
This encoder is widely used in industrial automation and control applications where precise incremental feedback is critical. The six-output channel setup allows diverse connectivity, while the pulse disk design maintains accuracy across resolutions. The device is available in clamping or servo flange styles, and its construction ensures stable performance in hazardous zones 2 and 22, guaranteeing long-term reliability.
Replacement model image below.
Technical Data
| Specification Category | Parameter | Details |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Pulse count | max. 5000 | |
| Functional safety related parameters | MTTFₐ | 140 a |
| L₁₀ | 70 E-9 at 6000 rpm | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | Operating voltage (UB) | 10 … 30 V DC |
| No-load supply current (I0) | max. 60 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (Ud) | < 3 V | |
| Load current | max. per channel 40 mA, short-circuit protected (not with UB), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Connection | Cable | ∅7.8 mm, 6 x 2 x 0.14 mm², 1 m |
| Standard conformity | Degree of protection | DIN EN 60529, IP64 |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Details |
|---|---|
| Operating temperature | Glass disk: -30 … 70 °C (-22 … 158 °F), cable, fixed installationPlastic disk: -30 … 60 °C (-22 … 140 °F), cable, fixed installation |
| Storage temperature | Glass disk: -30 … 70 °C (-22 … 158 °F)Plastic disk: -30 … 70 °C (-22 … 158 °F) |
Mechanical Specifications
| Parameter | Details |
|---|---|
| Material | Housing: powder coated aluminumFlange: AluminumShaft: Stainless steel |
| Mass | approx. 350 g |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | ≤ 25 gcm² |
| Starting torque | ≤ 1.5 Ncm |
| Shaft load | Axial: 40 NRadial: 60 N |
| Dimensions | Length: 50.5 mmDiameter: 58 mm |
Data for Hazardous Areas
| Item | Details |
|---|---|
| ATEX marking | ① II 3G Ex nA IIB T4 Ga X② II 3D Ex t IIIC T105°C Dc X |
| Certificate | PF 18 CERT 4775 X |
| Directive conformity | Directive 2014/34/EUEN IEC 60079-0:2018, EN 60079-15:2010, EN 60079-31:2014 |
