We provide a custom parallel encoder replacement for the CRF66-4096G4096C27, faithfully reproducing the original 4096×4096 multi-turn resolution and parallel output configuration. All essential mechanical and electrical specifications, including flange, shaft, housing, and connector orientation, are fully preserved, allowing seamless plug-and-play installation. This replacement offers an effective solution for clients facing procurement challenges while ensuring precise and reliable absolute feedback in industrial systems. Production and delivery are completed within 10–15 working days.
This replacement encoder has been widely adopted in the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Customers appreciate its stable multi-turn tracking, robust design, and high accuracy. It is suitable for CNC machinery, automated production lines, wind energy systems, and material-handling applications, offering dependable performance in demanding operational environments.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
