We provide a dedicated 1:1 replacement solution for the CR58-1024G19C01 parallel absolute encoder through non-standard custom manufacturing. This solution is specifically developed to resolve long-term procurement difficulties and legacy model replacement challenges in the industrial automation field. Based on the original unit, all mechanical mounting dimensions, shaft tolerances, electrical output logic and interface configurations are reproduced at a 1:1 level. Users can install the replacement encoder directly without any mechanical modification or parameter reconfiguration, achieving a seamless and reliable direct replacement experience.
Since the launch of this replacement encoder solution, it has quickly gained recognition from customers in many regions. We have successfully delivered customized versions to the Middle East, Russia, Indonesia, Brazil, Southeast Asia and Ukraine. Many customers choose this solution because of its strong performance stability, attractive cost structure and consistent quality. By optimizing our production workflow, we have shortened the manufacturing lead time to 15 working days, which significantly improves project schedules and reduces equipment downtime, earning wide market appreciation.
Reference image for alternative solution
Technical data
| Parameter | Value |
|---|---|
| Resolution | 2 to 4096 positions / 360° |
| Measuring range | 2 to 4096 turns |
| Total number of positions | |
| Measurement position deviation | |
| Output frequency* | 30 kHz max. up to 10 Bit / 360°; 10 kHz max. from 11 Bit |
| Disc coding | Gray code |
| Output code, parallel | Gray or Natural Binary |
| Code sense, serial | CW or CCW (Signal input E2) |
| Logic polarity | Positive |
| Memory circuit | Store or not store, signal input E1 |
| Enable circuit (for bus operation) | Active or inactive, (signal input E1) |
| Sensor system | GaAlAs diodes, photo-transistor array |
| Parallel output circuits | A = Open collector Darlington; B = Open collector, TTL compatible; C = Open emitter Darlington; D = Push-pull, Totem-pole |
| Serial output SSI | Differential data output to RS 422 |
| Clock input SSI | Differential (opto-coupler) for data driver to RS 422 |
| Supply voltage range | +11 V to +26 VDC |
| Supply current | Parallel: 90 mA typ. / 120 mA max.; Serial GSI: 130mA typ. / 160mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10° rad/s² max. |
| Inertial mass of rotor | ≤ 5 Ncm (8 Ncm - CR 66) |
| Wind-up torque | ≤ 1 Nm (4 Ncm - CR 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ revolutions |
| Operating temperature range | -20°C to +60°C |
| Storage temperature range | -25°C to +70°C |
| Permissible rel. humidity | 85% without condensation |
| Resistance to shock | 200 m/s², 11 ms (DIN IEC 68) |
| Resistance to vibration | 5 Hz..1000 Hz; 100 m/s² (DIN IEC 68) |
