Our 1:1 parallel absolute encoder replacement for the CRF66-4096G4096C24 preserves all original specifications, including 4096×4096 resolution and parallel output signals. The housing, shaft, flange, and connector orientation are fully replicated, ensuring a seamless installation experience. This solution addresses supply chain difficulties and provides a reliable alternative for industrial applications requiring high-precision absolute feedback. Standard production and delivery are completed within 10–15 working days.
The replacement has been successfully implemented in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Its accurate multi-turn tracking, mechanical robustness, and stable performance have earned customer recognition. Ideal for CNC machinery, automated assembly lines, wind turbine systems, and material-handling equipment.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
