For the CRF58-4096G4096E12, we offer a precision-engineered SSI absolute encoder replacement that replicates the original model’s specifications on a 1:1 basis. This includes mechanical compatibility, SSI output parameters, bit structure, and resolution characteristics. The solution is developed through non-standard customization, enabling customers to maintain their current mounting structure and interface connection without redesigning equipment. It serves as an optimal choice for facilities where the original encoder is difficult to obtain or requires long lead times, ensuring uninterrupted operation.
Our upgraded replacement solution has already been deployed across multiple countries, including installations in the Middle East, Indonesia, South America, Eastern Europe, and Southeast Asia. Customers appreciate its balance of robust performance, stable output, and an efficient delivery window of only 15 working days. These advantages make it a reliable and economical choice for both maintenance and long-term machine modernization.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
