We supply an OEM-level customized replacement for the CRF58-4096G4096E23 SSI absolute encoder. The design duplicates the original device’s mounting geometry, SSI coding structure, and 4096×4096 resolution configuration to achieve a true one-to-one match. This ensures complete compatibility with existing PLCs, drives, and automation systems. The replacement encoder is engineered for users who face challenges obtaining the original unit or require a consistent long-term supply source with stable technical support.
Since launch, the solution has been widely utilized by customers across Russia, the Middle East, Indonesia, Ukraine, Brazil, and other regions. Its optimized cost structure, stable signal integrity, and reasonable 15-working-day lead time contribute to its popularity. Many clients have chosen it as a dependable drop-in alternative for heavy-duty industrial environments requiring reliable absolute feedback.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
