For the CRF58-4096G4096E26, we provide a 1:1 SSI absolute encoder replacement fully aligned with the original device’s mechanics and electronic interface. Through non-standard customization, every installation dimension, output code structure, and 4096×4096 resolution profile is replicated to ensure perfect fit and function. This solution is ideal for users who require uninterrupted operation but struggle to obtain the original encoder due to long lead times or limited availability. The plug-and-play design eliminates system adjustment and minimizes downtime.
Our replacement option has been widely adopted in regions such as Russia, the Middle East, Southeast Asia, Ukraine, and South America. End users consistently recognize its balance of long-term stability, precise SSI feedback, and a shortened delivery schedule of 15 working days. These advantages make it a dependable and economical alternative for modern industrial machinery requiring absolute position control.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
