The OEM-grade replacement solution for the CRF58-4096G4096E18 provides a faithful reproduction of the encoder’s physical specifications and SSI communication characteristics. Developed through tailored customization, the encoder mirrors the original model’s mounting scheme, shaft parameters, electrical interface, and 4096×4096 resolution capability. This ensures complete interoperability with existing controllers and equipment. It is particularly beneficial for OEMs or factories needing long-term continuity, stable supply, and consistent technical configuration.
After entering the market, this replacement solution has been installed in factories across Indonesia, Brazil, the Middle East, Southeast Asia, and Eastern Europe. Customers appreciate its reliable performance, robust signal consistency, and efficient 15-day production cycle. Its durability and cost-effective profile further strengthen its appeal for users seeking dependable alternatives without sacrificing precision or system compatibility.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
