We offer a precision-engineered parallel encoder replacement for the CRF58-4096G4096A01, ensuring that all mechanical, electrical, and interface parameters are reproduced for seamless integration. This custom-built solution maintains the original 4096×4096 resolution and parallel output format, allowing direct installation without modifications. It is ideal for industrial systems where maintaining absolute feedback accuracy is critical and the original unit is difficult to source. Production time is 10–15 working days.
The replacement has been shipped to customers in Southeast Asia, the Middle East, Russia, Brazil, and Ukraine. It has received positive feedback for its reliability, robust construction, and stable multi-turn performance. With quick delivery and durable operation in challenging industrial environments, this encoder provides a cost-effective, high-performance alternative for automation, material handling, and energy applications.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
