Our custom replacement solution for the CRF58-4096G4096C21 replicates the original parallel absolute encoder’s full specification. All mechanical and electrical parameters—including shaft size, housing dimensions, and parallel output structure—are precisely reproduced. The tailored design ensures users can install the replacement directly without reprogramming or adapting existing systems. This solution is particularly useful for equipment facing supply constraints or requiring consistent high-precision absolute feedback.
It has been successfully utilized in industrial facilities in Russia, Southeast Asia, the Middle East, Brazil, and Ukraine. Customers value its accuracy, durability, and quick production cycle of 10–15 working days. The encoder reliably provides multi-turn absolute feedback in applications including CNC machinery, automated production lines, lifting equipment, and wind energy systems, making it a trusted solution for global operations.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
