We offer a custom-engineered replacement for the CRF65-4096G4096C08, replicating the original parallel absolute encoder’s 4096×4096 multi-turn resolution and electrical interface. The housing dimensions, shaft geometry, and connector orientation are preserved, allowing plug-and-play installation without modification. This solution is designed for industries facing supply challenges or seeking reliable, precise absolute encoder feedback in demanding applications. Standard delivery time is 10–15 working days.
This replacement has been successfully adopted in the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Clients report consistent feedback accuracy, stable multi-turn tracking, and high mechanical robustness. The encoder performs reliably in CNC machinery, material handling, wind turbines, and automated production systems, providing a cost-effective, high-quality alternative to the original equipment.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
