The CRF65-4096G4096C02 is supported by a full OEM replacement encoder, engineered to maintain identical mechanical and electrical features, including 4096×4096 multi-turn resolution and parallel output format. This solution reproduces the original flange, shaft, housing, and connector arrangement, allowing direct installation into legacy and new systems. With a production cycle of 10–15 working days, it provides a fast and reliable alternative for manufacturers and maintenance teams seeking high-quality rotary encoders.
This model has been widely used in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Customers value its robust construction, stable multi-turn performance, and accurate absolute feedback under continuous industrial operation. The OEM replacement is suitable for demanding applications in CNC machinery, automated assembly lines, lifting systems, and energy equipment, combining durability with consistent performance.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
