Our custom replacement for the CRF65-4096G4096C32 replicates the original parallel absolute encoder’s specifications, including its 4096×4096 multi-turn resolution and parallel output format. The encoder’s mechanical dimensions, shaft, flange, and connector are fully maintained to enable direct installation without adjustments. This solution is ideal for customers seeking high-precision absolute feedback while ensuring timely availability. Lead time is 10–15 working days.
This encoder has been successfully deployed in Russia, the Middle East, Southeast Asia, Brazil, and Ukraine. Its consistent performance, robust construction, and accurate multi-turn tracking have earned positive feedback from industrial users. It is designed for applications in CNC machinery, automated production lines, lifting equipment, and energy systems, offering a reliable and cost-effective alternative to the original model.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
