We provide an OEM-grade rotary encoder replacement for the CRF65-4096G4096C21, matching the original device’s 4096×4096 multi-turn resolution and parallel output configuration. All critical mechanical and electrical features—including flange size, shaft interface, housing dimensions, and connector type—are reproduced for seamless installation. The solution addresses sourcing difficulties and offers reliable performance in demanding industrial environments. Production and delivery are completed within 10–15 working days.
This replacement has been widely adopted in the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Clients value its high accuracy, stable multi-turn performance, and robust design under continuous-duty conditions. It is especially suitable for CNC machines, industrial automation systems, wind turbines, and material-handling equipment where precise absolute feedback is essential.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
