Our 1:1 replacement solution for the CRF65-4096G4096C22 mirrors the original 4096×4096 multi-turn resolution and parallel output configuration. Mechanical dimensions, shaft interface, flange, and housing geometry are all preserved to enable seamless integration into existing systems. This replacement eliminates installation adjustments and maintains electrical and mechanical compatibility, providing an effective solution for customers who require precise absolute feedback while facing sourcing constraints. Standard lead time is 10–15 working days.
This encoder replacement has been widely used in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Customers highly value its consistent multi-turn performance, robust construction, and timely delivery. It is ideally suited for industrial automation, CNC machinery, wind turbine systems, and heavy-duty material-handling equipment, delivering stable and accurate absolute feedback over long operational periods.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
