Our custom replacement for the CRF65-4096G4096D03 replicates the original parallel absolute encoder’s 4096×4096 multi-turn resolution and output characteristics. The shaft, flange, housing, and parallel output interface are fully preserved, enabling plug-and-play installation without adjustments. This solution provides an effective alternative for customers seeking consistent, reliable absolute feedback in industrial automation or critical control applications. Lead time is 10–15 working days.
This replacement has been successfully adopted by customers in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Users praise its precision, mechanical robustness, and stable multi-turn performance. It is ideal for CNC machines, automated assembly lines, lifting systems, and wind turbine applications, providing a dependable and cost-effective solution.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
