We provide an OEM-grade rotary encoder replacement for the CRF65-4096G4096C09, faithfully replicating all key features of the original 4096×4096 multi-turn parallel encoder. The flange, shaft, housing, and connector orientation are fully maintained, allowing direct integration into existing systems. This replacement solution offers a reliable, high-precision alternative for applications requiring stable and accurate absolute feedback. Production and delivery are completed within 10–15 working days.
The encoder has been successfully adopted by customers in the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Its robust design, high positional accuracy, and stable multi-turn performance make it ideal for CNC machinery, automated assembly lines, wind turbine systems, and other industrial automation applications requiring dependable absolute feedback.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
