For the CRF105-4096G4096A08, we provide a custom-manufactured absolute encoder replacement that replicates the original multi-turn 4096×4096 architecture while maintaining identical mechanical and electrical interfaces. Each detail—from shaft configuration to flange geometry, from housing dimensions to parallel output layout—is precisely matched, ensuring immediate compatibility with existing equipment. This custom solution is ideal for customers unable to source original models or needing a dependable long-term supply. Standard delivery is completed within 10–15 working days.
The custom replacement has attracted customers from Southeast Asia, the Middle East, Brazil, Russia, and neighboring regions. Its reliable multi-turn tracking, robust mechanical structure, and stable long-term performance make it suitable for a broad range of automation equipment, including CNC machinery, conveyor systems, industrial drives, and lifting mechanisms.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
