We offer a personalized custom-built absolute encoder replacement for the CRF105-4096G4096D01, engineered to reproduce the original encoder’s 4096×4096 multi-turn capability and parallel output structure. Every installation specification—including the mounting flange, shaft tolerance, device footprint, and connector positioning—is recreated precisely to ensure immediate compatibility without retrofitting. This custom solution is particularly suitable for users requiring stable long-term supply or replacements for hard-to-source models. Production is completed within 10–15 working days.
The model has earned trust across global markets such as Southeast Asia, Ukraine, Brazil, and the Middle East. Users praise its smooth multi-turn performance, resilient housing materials, and low-maintenance operational behavior. It performs reliably in automation cells, material-handling equipment, industrial lifting systems, and CNC installations.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
