For the CRF105-4096G4096C29, we supply a fully compatible parallel encoder replacement designed as a direct 1:1 alternative. Matching the original 4096×4096 multi-turn absolute resolution and parallel output, the replacement retains all mechanical fittings such as shaft size, flange interface, mounting hole pattern, and electrical pin definition. This solution ensures effortless installation for users facing discontinued parts or extended delivery times. Standard production requires 10–15 working days.
Globally, this replacement model has been adopted by customers in Russia, Indonesia, the Middle East, Brazil, and Southeast Asia. Its consistent output signal, stable long-term performance, and economic price advantage make it a preferred choice for industrial machines requiring dependable position feedback. It integrates well into conveyor drives, automation frameworks, robotics, and motion-platform retrofits.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
