Product Review
The PVM78E-011K2R0BN-1213 is built for industries requiring precise motion control with maximum safety. As part of the explosion-proof encoder series, it guarantees safe operation in explosive atmospheres while delivering stable multiturn absolute position feedback. Its durability makes it a reliable choice for continuous operations in energy and automation sectors.
Custom Replacement Solution
Our replacement unit for the PVM78E-011K2R0BN-1213 provides full compatibility with the original model. Featuring identical shaft and flange options, as well as equivalent Profibus protocol support, the replacement can be directly installed in existing systems. This solution ensures continuity of operation, reliability, and adherence to safety standards.
Technical Data for Multiturn Absolute Rotary Encoder PVM78E
General Specifications
| Attribute | Details |
|---|---|
| Detection Type | Photoelectric Sampling |
| Device Type | Multiturn Absolute Rotary Encoder |
| Functional Safety (MTTFd) | 210 a, L10: 7.7 E+9 at 3000 rpm |
| Operating Voltage (U_B) | 10 … 30 V DC |
| No-load Supply Current (I_0) | max. 230 mA at 10 V DC, max. 100 mA at 24 V DC |
| Time Delay Before Availability | < 1000 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output Code | Binary Code |
| Interface Type | PROFIBUS DP |
| Resolution | Single Turn: Up to 16 Bit, Multiturn: Up to 14 Bit, Overall: Up to 30 Bit |
| Transfer Rate | 0.0096 … 12 MBit/s |
| Standard Conformity | PNO profile 3.062, RS-485 |
Environmental and Durability
| Attribute | Details |
|---|---|
| Degree of Protection | DIN EN 60529, IP66 |
| Climatic Testing | DIN EN 60068-2-78, no moisture condensation |
| Emitted Interference | EN 61000-6-4:2007/A1:2011 |
| Noise Immunity | EN 61000-6-2:2005 |
| Shock Resistance | DIN EN 60068-2-27, 100 g, 3 ms |
| Vibration Resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz |
Approvals and Certificates
| Attribute | Details |
|---|---|
| IECEx Approval | Equipment protection level Gb, IECEx ITS 15.0061X |
| ATEX Approval | Equipment protection level Gb, ITS 15 ATEX 18372X |
Ambient Conditions
| Attribute | Range |
|---|---|
| Operating Temperature | -40 … 70 °C (-40 … 158 °F) |
| Storage Temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Attribute | Details |
|---|---|
| Material | Housing, Flange: Anodized Aluminum or Stainless Steel 1.4404 / AISI 316L, Shaft: Stainless Steel 1.4404 / AISI 316L |
| Mass | approx. 2600 g (combination 1), approx. 3900 g (combination 2) |
| Rotational Speed | max. 3000 min^-1 |
| Moment of Inertia | 180 gcm^2 |
| Starting Torque | ≤ 4 Ncm |
| Shaft Load | Axial: 60 N, Radial: 80 N |
Connectivity
| Attribute | Details |
|---|---|
| Cable Connection | ∅9.6 mm, 7-core, Terminal compartment for connections |
Operating Modes and Parameters
| Operating Mode / Parameter | Description |
|---|---|
| Direction of Rotation | Programmable, cw ascending or descending |
| Scaling Function | Supported, programmable resolution per revolution |
| Preset Function | Supported, programmable preset value |
| Diagnostic Reporting | Expanded diagnostic reporting supported |
| Speed Transfer | Supported, with selectable unit |
| Limit Switches | Programmable limit switches (software) |
| Commissioning Mode | Supported, with commissioning mode |
Disclaimer:
All content on this site is original unless otherwise noted. Copying, collecting, or publishing any material without our permission is prohibited. If any content infringes on copyright, please contact us.
