30-3601_A-20 Incremental Encoder Custom Replacement Model
Solución de sustitución personalizada
Our custom replacement units for the 30-3601_A-20 encoder provide non-standard options such as modified shaft length, flange design, and output signal configuration. Produced efficiently in-house, these encoders can be delivered within approximately 10 working days. This solution ensures rapid replacement and minimal disruption to production processes while maintaining the high reliability and accuracy of the original device. The flexibility in customization makes these encoders ideal for specialized industrial applications.
Revisión del producto
The 30-3601_A-20 incremental encoder features 20 PPR output for low-resolution incremental feedback applications. Its robust steel housing and reinforced shaft handle mechanical stress, while IP65-rated protection ensures resistance to dust, moisture, and vibration. This encoder is well-suited for conveyors, small automation systems, and other industrial machinery requiring reliable and precise incremental feedback.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Pulse count | max. 5000 |
| Especificaciones eléctricas | Operating voltage (UG) | 10 ... 30 V CC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoría | Parámetro | Detalles |
|---|---|---|
| Conexión | Conector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | Aprobación UL | cULus Listed, uso general, fuente de alimentación de clase 2 |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de almacenamiento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Combinación 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combinación 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Masa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | < 270 g·m² |
| Par de arranque | ≤ 5 N·cm |
| Carga del eje | Axial: 60 NRadial: 80 N |
