RVI58X-011K1A61N-00100 Incremental Rotary Encoder Custom Replacement Model
We can supply a custom replacement for the RVI58X-011K1A61N-00100 incremental rotary encoder, with production completed in approximately 10–15 working days. This allows rapid replenishment for critical production lines. The replacement is fully compatible with the original encoder, ensuring seamless integration without additional setup.
This encoder is designed for versatile use in control systems where incremental position feedback is essential. Its six-channel output and flexible mounting options support diverse industrial environments. With plastic and glass pulse disks depending on pulse count requirements, the device provides accurate and stable performance. The unit is suitable for zone 2 and zone 22 installations, guaranteeing safe operation in hazardous areas.
Imagen del modelo de sustitución a continuación.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Tipo de detección | muestreo fotoeléctrico |
| Pulse count | max. 5000 | |
| Parámetros relacionados con la seguridad funcional | MTTFₐ | 140 a |
| L₁₀ | 70 E-9 at 6000 rpm | |
| Cobertura diagnóstica (CD) | 0 % | |
| Especificaciones eléctricas | Operating voltage (UB) | 10 ... 30 V CC |
| No-load supply current (I0) | max. 60 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (Ud) | < 3 V | |
| Load current | max. per channel 40 mA, short-circuit protected (not with UB), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Conexión | Cable | ∅7.8 mm, 6 x 2 x 0.14 mm², 1 m |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP64 |
| Pruebas climáticas | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Resistencia a los golpes | DIN EN 60068-2-27, 100 g, 3 ms | |
| Resistencia a las vibraciones | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
| Approvals and certificates | Aprobación UL | cULus Listed, uso general, fuente de alimentación de clase 2 |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | Glass disk: -30 … 70 °C (-22 … 158 °F), cable, fixed installationPlastic disk: -30 … 60 °C (-22 … 140 °F), cable, fixed installation |
| Temperatura de almacenamiento | Glass disk: -30 … 70 °C (-22 … 158 °F)Plastic disk: -30 … 70 °C (-22 … 158 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Housing: powder coated aluminumFlange: AluminumShaft: Stainless steel |
| Masa | approx. 350 g |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | ≤ 25 gcm² |
| Par de arranque | ≤ 1.5 Ncm |
| Carga del eje | Axial: 40 NRadial: 60 N |
| Dimensiones | Length: 50.5 mmDiameter: 58 mm |
Data for Hazardous Areas
| Item | Detalles |
|---|---|
| ATEX marking | ① II 3G Ex nA IIB T4 Ga X② II 3D Ex t IIIC T105°C Dc X |
| Certificate | PF 18 CERT 4775 X |
| Directive conformity | Directive 2014/34/EUEN IEC 60079-0:2018, EN 60079-15:2010, EN 60079-31:2014 |
