30-3601_A-1000 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement solution for the 30-3601_A-1000 model allows full adaptation to non-standard requirements, including shaft dimensions, flange type, and electrical output configuration. Produced in-house with high efficiency, these units can be delivered within approximately 10 working days, helping customers maintain operational continuity.
Product Review
The 30-3601_A-1000 incremental encoder provides reliable incremental feedback for medium- and heavy-duty industrial applications. Its 1000 PPR output enables precise position monitoring for conveyors, robotic systems, and industrial machinery. The steel housing and reinforced shaft resist radial loads of 80 N and axial loads of 60 N, while IP65 protection ensures durability in dust- and moisture-prone environments.
Données techniques
| Specification Category | Paramètres | Détails |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Paramètres | Détails |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Paramètres | Détails |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Paramètres | Détails |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
