A 1:1 OEM replacement version of the ASM58N-F2AK1RHGN-1213 multiturn encoder is available with a standard production cycle of 10 working days. This replacement maintains full compatibility with the original encoder’s housing size, mechanical connection, and SSI interface configuration, ensuring smooth integration without modification.
The encoder utilizes 30-bit multiturn technology for highly accurate position detection and fast data response. Its RS422-based SSI output is optically isolated to prevent interference in electrically noisy environments. The recessed hollow shaft allows direct mounting without couplings, improving system stability. Designed as a hardware encoder, it delivers real-time response without computational delay—an essential feature for synchronous motion control and automation systems.
Replacement solution image.
Technical data
| Parameter | Value |
|---|---|
| General specifications | |
| Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder |
| Electrical specifications | |
| Operating voltage | 4.5 ... 30 V DC |
| No-load supply current | max. 180 mA |
| Time delay before availability | < 250 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output code | Gray code, Binary code |
| Code course (counting direction) | cw descending (clockwise rotation, code course descending) |
| Interface | |
| Interface type | SSI |
| Monoflop time | 20 ± 10 μs |
| Resolution | - Single turn: up to 16 Bit- Multiturn: 14 Bit- Overall resolution: up to 30 Bit |
| Transfer rate | 0.1 ... 2 MB/s |
| Voltage drop | V |
| Standard conformity | RS 422 |
| Input 1 | |
| Input type | Selection of counting direction (cw/ccw) |
| Signal voltage | - High: 4.5 ... 30 V- Low: 0 ... 2 V |
| Input current | < 8 mA |
| Switch-on delay | < 10 ms |
| Connection | |
| Connector | type 9416 (M23), 12-pin, type 9416L (M23), 12-pin |
| Cable | 67 mm, 8 × 2.0 × 0.14 mm², 1 m |
| Standard conformity | |
| Degree of protection | DIN EN 60529, IP65 (without shaft seal); DIN EN 60529, IP66/IP67 (with shaft seal) |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
