RVI58X-011K1A61N-00500 Incremental Rotary Encoder Custom Replacement Model
We offer a custom replacement model for the RVI58X-011K1A61N-00500 incremental rotary encoder. Our solution maintains the same mechanical and electrical interface as the original product, and the production lead time is approximately 10–15 working days. This rapid turnaround helps ensure timely delivery and supports clients in overcoming supply chain challenges. The replacement model can be integrated seamlessly into existing systems without requiring additional modifications.
This incremental encoder is widely used across industrial applications where precise position feedback is required. Its flexible six-output channel design allows compatibility with various drive systems and control setups. The encoder can be deployed in zone 2 and zone 22 environments, making it suitable for hazardous area installations. Additionally, the pulse disk is engineered in plastic for counts up to 1500 pulses and in glass for higher resolutions, ensuring reliability and accuracy across a wide range of tasks.
Replacement model image below.
Data Teknis
| Specification Category | Parameter | Detail |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Pulse count | max. 5000 | |
| Functional safety related parameters | MTTFₐ | 140 a |
| L₁₀ | 70 E-9 at 6000 rpm | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | Operating voltage (UB) | 10 … 30 V DC |
| No-load supply current (I0) | max. 60 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (Ud) | < 3 V | |
| Load current | max. per channel 40 mA, short-circuit protected (not with UB), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Koneksi | Cable | ∅7.8 mm, 6 x 2 x 0.14 mm², 1 m |
| Standard conformity | Degree of protection | DIN EN 60529, IP64 |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | Glass disk: -30 … 70 °C (-22 … 158 °F), cable, fixed installationPlastic disk: -30 … 60 °C (-22 … 140 °F), cable, fixed installation |
| Storage temperature | Glass disk: -30 … 70 °C (-22 … 158 °F)Plastic disk: -30 … 70 °C (-22 … 158 °F) |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Housing: powder coated aluminumFlange: AluminumShaft: Stainless steel |
| Mass | approx. 350 g |
| Rotational speed | max. 6000 min⁻¹ |
| Momen inersia | ≤ 25 gcm² |
| Starting torque | ≤ 1.5 Ncm |
| Shaft load | Axial: 40 NRadial: 60 N |
| Dimensions | Length: 50.5 mmDiameter: 58 mm |
Data for Hazardous Areas
| Item | Detail |
|---|---|
| ATEX marking | ① II 3G Ex nA IIB T4 Ga X② II 3D Ex t IIIC T105°C Dc X |
| Certificate | PF 18 CERT 4775 X |
| Directive conformity | Directive 2014/34/EUEN IEC 60079-0:2018, EN 60079-15:2010, EN 60079-31:2014 |
