RVI58X-032K1R61N-02000 Incremental Encoder Custom Replacement Model
Our company provides a stainless-steel replacement for the RVI58X-032K1R61N-02000 incremental encoder. Production is completed within 10–15 working days, ensuring rapid response to procurement needs. The replacement maintains 1:1 dimensional and performance compatibility, allowing seamless integration into existing systems without requiring changes in mounting or wiring configurations. This approach guarantees that customers can restore production efficiency quickly and reliably.
In terms of application, this encoder provides 2000 pulses per revolution, striking a balance between resolution and processing speed. It is widely adopted in conveyor control, speed regulation of motors, and general automation systems where medium-to-high resolution is sufficient. The six-channel incremental outputs make it adaptable to different wiring and controller standards, increasing system flexibility. Built with a stainless-steel housing, the encoder withstands challenging industrial environments while maintaining high signal accuracy. Safety certification for hazardous zones 2 and 22 allows deployment in areas with potential explosive atmospheres, further broadening its industrial usability. As a result, the encoder offers both performance precision and environmental robustness, ensuring consistent reliability over its service life.
Data Teknis
| Specification Category | Parameter | Detail |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Pulse count | max. 5000 | |
| Functional safety related parameters | MTTFₐ | 140 a |
| L₁₀ | 70 E-9 at 6000 rpm | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | Operating voltage (UB) | 10 … 30 V DC |
| No-load supply current (I0) | max. 60 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (Ud) | < 3 V | |
| Load current | max. per channel 40 mA, short-circuit protected (not with UB), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Koneksi | Cable | ∅7.8 mm, 6 x 2 x 0.14 mm², 1 m |
| Standard conformity | Degree of protection | DIN EN 60529, IP64 |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | Glass disk: -30 … 70 °C (-22 … 158 °F), cable, fixed installationPlastic disk: -30 … 60 °C (-22 … 140 °F), cable, fixed installation |
| Storage temperature | Glass disk: -30 … 70 °C (-22 … 158 °F)Plastic disk: -30 … 70 °C (-22 … 158 °F) |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Housing: powder coated aluminumFlange: AluminumShaft: Stainless steel |
| Mass | approx. 350 g |
| Rotational speed | max. 6000 min⁻¹ |
| Momen inersia | ≤ 25 gcm² |
| Starting torque | ≤ 1.5 Ncm |
| Shaft load | Axial: 40 NRadial: 60 N |
| Dimensions | Length: 50.5 mmDiameter: 58 mm |
Data for Hazardous Areas
| Item | Detail |
|---|---|
| ATEX marking | ① II 3G Ex nA IIB T4 Ga X② II 3D Ex t IIIC T105°C Dc X |
| Certificate | PF 18 CERT 4775 X |
| Directive conformity | Directive 2014/34/EUEN IEC 60079-0:2018, EN 60079-15:2010, EN 60079-31:2014 |
