ESM58N-F2APNR0BN-1416 ProfiNet Encoder Custom Replacement Solution
Custom Replacement Solution
We offer a fully customized replacement solution for the ESM58N-F2APNR0BN-1416 encoder, guaranteeing precise 1:1 matching of application parameters and installation dimensions. The production cycle is approximately 10 working days. These replacement encoders have achieved strong recognition in international markets such as South America, Southeast Asia, the Middle East, and Russia, proving their stable performance and reliability.
Product Review
The ESM58N-F2APNR0BN-1416 is a 30-bit absolute multiturn encoder, combining 16-bit single-turn and 14-bit multiturn resolution. It features a Ø58 mm industrial housing, recessed hollow shaft, and supports PROFINET IRT. The integrated 2-port switch allows network loop-through, and operational modes include polled, cyclic, and change-of-state. A webserver interface provides browser-based configuration, resolution tuning, IP address setting, and email notifications. The encoder is mechanically compatible with major fieldbus interfaces and runs stably without a coupling.
Replacement model image below.
Dane techniczne
| Kategoria specyfikacji | Parametr | Szczegóły |
|---|---|---|
| Specyfikacje ogólne | Typ wykrywania | próbkowanie fotoelektryczne |
| Device type | Multiturn absolute encoder | |
| UL File Number | E223176 "For use in NFPA 79 Applications only", fUL marking is marked on the product. | |
| Parametry związane z bezpieczeństwem funkcjonalnym | MTTFd | 120 a |
| Mission Time (Tm) | 20 a | |
| Load | EN 611 at 6000 rpm and 20/40 N axial/radial shaft load | |
| Zakres diagnostyczny (DC) | 0 % | |
| Specyfikacje elektryczne | Operating voltage Uₐ | 10 ... 30 V DC |
| Power consumption P₀ | max. 4 W | |
| Linearity | ± 0.5 LSB (12 Bit) | |
| Output code | binary code | |
| Code course (counting direction) | cw ascending (clockwise rotation, code course ascending)ccw descending (clockwise rotation, code course descending) | |
| Interface | Interface type | PROFINET IO |
| Resolution | Single turn: up to 16 BitMultiturn: 14 BitOverall resolution: up to 30 Bit | |
| Physical | Ethernet | |
| Transfer rate | 100 MBit/s | |
| Cycle time (RT) | > 1 ms, ≤ 10 ms (RT) | |
| Połączenie | Connector | Ethernet: 2 sockets M12 1,4-pin, D-codedSupply: 1 plug M12 1,4-pin, A-coded |
| Zgodność z normami | Stopień ochrony | DIN EN 60529:- shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)- housing: IP65- Stainless steel version (inox): completely IP67 |
| Testy klimatyczne | EN 60068-2-3: no moisture condensation | |
| Odporność na wstrząsy | EN 60068-2-27: 100 g, 6 ms | |
| Odporność na wibracje | EN 60068-2-6: 10 g ... 2000 Hz |
Warunki otoczenia
| Parametr | Szczegóły |
|---|---|
| Temperatura pracy | -40 … 85 °C (-40 … 185 °F) |
| Temperatura przechowywania | -40 … 85 °C (-40 … 185 °F) |
Specyfikacje mechaniczne
| Parametr | Szczegóły |
|---|---|
| Materiał | Standard version:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 1:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 2 (inox):housing: stainless steel 1.4305 / AISI 303flange: stainless steel 1.4301 / AISI 304shaft: stainless steel 1.4305 / AISI 303 |
| Masa | approx. 910 g (combination 1)approx. 1200 g (combination 2) |
| Prędkość obrotowa | maks. 6000 min-¹ |
| Moment bezwładności | 30 gcm² |
| Rozruchowy moment obrotowy | 30 mNmmax. 3 Nm (version without shaft seal) |
| Tightening torque, fastening screws | max. 1.18 Nm |
| Shaft offset | Axial offset: ± 0.9 °Radial offset: - static: ± 0.3 mm, dynamic: ± 0.1 mm - static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Obciążenie wału | Axial: 20 NRadial: 40 N |
| Wymiary | Diameter: 59 mm |
Approvals and Certificates
| Certification | Szczegóły |
|---|---|
| Zatwierdzenie UL | Źródło zasilania klasy 2, ogólnego przeznaczenia, zgodne z normą cULus |
