RVI70E-021K2A61N-00100 Explosion-Proof Encoder Custom Replacement Solution
Our replacement for the RVI70E-021K2A61N-00100 explosion-proof encoder is specifically developed to mirror the original product in all critical aspects, from size to electrical specifications. Customers can install it directly without adjustment, benefiting from a lead time of around 10 working days. This has enabled industrial partners in Southeast Asia, the Middle East, South America, and Russia to maintain efficient production lines with minimal downtime.
The RVI70E-021K2A61N-00100 encoder is designed to operate securely in potentially explosive environments, making it suitable for hazardous zones. It offers incremental feedback at 100 pulses, ideal for applications requiring reliable yet lower-resolution signal output. The ruggedized enclosure and explosion-proof certification ensure that it maintains safe functionality in challenging conditions. Its durability and consistent accuracy make it a dependable component in safety-critical automation systems.
Replacement model image below.
Dane techniczne
| Kategoria specyfikacji | Parametr | Szczegóły |
|---|---|---|
| Specyfikacje ogólne | Typ wykrywania | próbkowanie fotoelektryczne |
| Device type | Incremental rotary encoder | |
| Liczba impulsów | maks. 5000 | |
| Parametry związane z bezpieczeństwem funkcjonalnym | MTTFₐ (Mean Time To Failure) | 140 a |
| L₁₀ (Bearing life) | 1.6 E-9 at 3000 rpm | |
| Specyfikacje elektryczne | Napięcie robocze (UB) | 10 … 30 V DC or 5 V DC ± 5% (see "Output circuit" in ordering information) |
| No-load supply current (IB) | maks. 60 mA | |
| Typ wyjścia | push-pull, incremental or RS 422, incremental (see "Output circuit" in ordering information) | |
| Voltage drop (UL) | < 4 V (push-pull, incremental) | |
| Prąd obciążenia | max. per channel 35 mA (push-pull, short-circuit protected, reverse polarity protected)max. per channel 20 mA (RS 422, short-circuit protected, reverse polarity protected) | |
| Częstotliwość wyjściowa | maks. 200 kHz | |
| Czas narastania | 250 ns | |
| Phase position A to B | 90° ± 18° | |
| Duty cycle | 1/2 ± 20% | |
| De-energized delay (toff) | 250 ns | |
| Połączenie | Kabel | ∅10.2 mm, Radox 9 × 0.5 mm² |
| Zgodność z normami | Stopień ochrony | DIN EN 60529, IP66DIN EN 60529, IP67 |
| Testy klimatyczne | DIN EN 60068-2-30, no moisture condensation | |
| Emitowane zakłócenia | EN IEC 61000-6-4:2019 | |
| Odporność na zakłócenia | EN IEC 61000-6-2:2019 | |
| Odporność na wstrząsy | DIN EN 60068-2-27: 100 g, 6 ms | |
| Odporność na wibracje | DIN EN 60068-2-6: 10 g ... 2000 Hz |
Approvals and Certificates
| Certification | Szczegóły |
|---|---|
| IECEx approval | Equipment protection level Gb: IECEx ZLM 14.0003XEquipment protection level Db: IECEx ZLM 14.0003X |
| ATEX approval | Equipment protection level Gb: ZELM 14 ATEX 0619 XEquipment protection level Db: ZELM 14 ATEX 0619 X |
| CCC approval | 2020323414001056 |
| Hazardous Location | 19-AVBO-0390 and 19-AVBO-0391 |
| KCC approval | (not specified) |
Warunki otoczenia
| Parametr | Szczegóły |
|---|---|
| Temperatura pracy | -40 … 70 °C (-40 … 158 °F) |
| Temperatura przechowywania | -40 … 70 °C (-40 … 158 °F) |
Specyfikacje mechaniczne
| Parametr | Szczegóły |
|---|---|
| Materiał | Combination 1:housing: anodized aluminumflange: stainless steel 1.4401 / AISI 316shaft: stainless steel 1.4401 / AISI 316Combination 2 (inox):housing: anodized aluminumflange: stainless steel 1.4401 / AISI 316shaft: stainless steel 1.4401 / AISI 316 |
| Masa | approx. 1300 g (combination 1)approx. 1500 g (combination 2, anodized) |
| Prędkość obrotowa | maks. 6000 min-¹ |
| Moment bezwładności | 400 g·cm² |
| Rozruchowy moment obrotowy | < 5 mN·m |
| Obciążenie wału | Axial: 150 NRadial: 110 N |
General Information
| Pozycja | Szczegóły |
|---|---|
| Use in hazardous area | see Instruction manuals |
