We have developed an equivalent model to replace the PVS14N-05MK2A021-0013 Profibus absolute encoder, providing full 1:1 mechanical and electrical compatibility. This replacement unit matches the original encoder’s mounting interface, shaft configuration, and connector layout, allowing for direct installation without any modifications. The standard delivery time for this encoder is 15 working days, ensuring a prompt and reliable solution for maintenance, retrofit, or spare part applications.
Our equivalent encoder has already been applied in several international regions, including the Middle East, Russia, Southeast Asia, Indonesia, and South America, where it has demonstrated stable and reliable performance. The robust construction, accurate signal output, and resistance to vibration and temperature fluctuations make it suitable for demanding industrial environments. It is ideal for motion control, automation, and heavy-duty machinery that require precise absolute position feedback.
Replacement Solution image.
Technical data
| Parameter | Value |
|---|---|
| General specifications | |
| Detection type | photoelectric sampling |
| Electrical specifications | |
| Operating voltage | 10 … 30 V DC |
| No-load supply current | max. 190 mA |
| Output code | binary code |
| Code course (counting direction) | cw ascending/descending (programmable) |
| Interface | |
| Interface type | PROFIBUS |
| Protocol | DP |
| Single turn | 13 Bit |
| Transfer rate | 0.005 … 12 MBit/s |
| Standard conformity | PNO profile 3.062 |
| Connection | |
| Cable | ∅11.2 mm, 9-core, 2 m |
| Standard conformity | |
| Protection degree | DIN EN 60529, IP66 |
| Emitted interference | EN 61000-6-4:2007 |
| Noise immunity | EN 61000-6-2:2005 |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz |
| Ambient conditions | |
| Operating temperature | -40 … 55 °C (-40 … 131 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications | |
| Housing material | aluminum |
| Shaft material | stainless steel |
| Mass | approx. 3400 g |
| Rotational speed | max. 6000 min⁻¹ |
| Starting torque | ≤ 5 Ncm |
| Shaft load axial | 60 N |
| Shaft load radial | 80 N |
| Data for Ex-areas application | |
| EC-Type Examination Certificate | ZELM 02 ATEX 0078 X |
| Protection type | II 2G Ex nA IIC T6 Gb; II 2D Ex tD IIC 180 °C Db IP66 |
| Directive conformity | EN 60079-0:2012; EN 60079-1:2007; EN 60079-31:2009 |
