30-3601_A-2000 Incremental Encoder Custom Replacement Model
Solução de substituição personalizada
We offer a custom replacement solution for the 30-3601_A-2000 incremental encoder, providing non-standard adaptations such as modified shaft length, flange type, and output signal configuration. These tailored units are designed to meet the unique requirements of your application while maintaining the original performance specifications. Manufactured in-house with precision, these encoders are available within approximately 10 working days, allowing for rapid replacement and minimizing operational downtime.
Análise do produto
The 30-3601_A-2000 incremental encoder delivers 2000 PPR output for precise motion control in industrial automation and machinery. Its robust steel housing and reinforced shaft provide resistance to radial and axial loads, while IP65-rated protection ensures reliability in dusty, wet, or vibrating environments. This makes it suitable for conveyors, packaging machinery, and other automated industrial systems where consistent and accurate incremental feedback is critical.
Dados técnicos
| Specification Category | Parâmetro | Detalhes |
|---|---|---|
| Especificações gerais | Pulse count | max. 5000 |
| Especificações elétricas | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoria | Parâmetro | Detalhes |
|---|---|---|
| Conexão | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidade com os padrões | Grau de proteção | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parâmetro | Detalhes |
|---|---|
| Temperatura operacional | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de armazenamento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parâmetro | Detalhes |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Massa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidade de rotação | máx. 6000 min-¹ |
| Momento de inércia | < 270 g·m² |
| Torque inicial | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
