The FGH6KK-1000G-90G-NG-J/50P is a through hollow shaft encoder designed for high-torque machinery and dynamic speed control systems. We provide a complete 1:1 replacement solution that mirrors the mechanical and electrical characteristics of the original encoder. This ensures users can seamlessly integrate our replacement unit into their equipment with zero reconfiguration. Our team focuses on reducing delivery time and maintaining consistent quality standards to meet urgent industrial needs.
This encoder type is widely used in metallurgical rolling lines, heavy cranes, and continuous casting operations, where strong resistance to shock and temperature fluctuations is essential. Our replacement version delivers identical performance stability, featuring enhanced internal sealing and upgraded bearings to extend service life under heavy load operation. These improvements ensure reliable data transmission even in challenging environments with dust, vibration, and oil exposure.
Replacement solution image.
Technical Parameters Table
1. Electrical and mechanical data
| Item | Value |
|---|---|
| Pulse | 1024, 2000 |
| Preferred pulse rates (nickel disks) | 256, 600, 1000, 1200, 1920, 2048, 2500, 4000, 4096, 5000 |
| Pulse rates available | - |
2. Connection data
| Item | Value |
|---|---|
| Supply voltage | 12 … 30 VDC (Option: 5 VDC) |
| No-load-current | approx. 100 mA at 30 V (without Option) |
| Outputs | Differential-driver, resistant to sustained short-circuit, current limited, short-circuit. |
| Pulse height (HTL) | approx. as supply voltage |
| Internal resistance | 50 Ω per output |
| Pulse height (TTL) | 5 V to RS 422 |
| Slew rate | 50 V / μs |
| Pulse duty factor | 1:1 ± 5 % |
| Max. frequency | to 50 KHz < 3 %to 150 KHz < 5 %0 to 100 KHz. (to 150 KHz on request) |
3. Encoder temperature ranges
| Item | Value |
|---|---|
| Standard | 0°C … + 70°C |
| Special temperature | -25°C … + 85°C |
4. Special output voltage 5V (TTL)
| Item | Value |
|---|---|
| Pulse height | 5V, RS422 compatible (TIA/EIA - Standard) |
| Supply voltage | 12 … 30 VDC |
5. Protection class (DIN EN 60529)
| Protection class DIN EN 60529 | Sealing | Mechanical speed | Description | Breakaway torque |
|---|---|---|---|---|
| IP 54 | Special seal | ≤ 4000 rpm | Protection against dust and water spray | approx. 30 to 50 Ncm |
| IP 66only drive side | Radial shaft seal | ≤ 1500 rpm | Protection against dust and water spray | approx. 60 Ncm |
| IP 66both sides | Radial shaft seal | ≤ 1100 rpm | Protection against dust and water spray | approx. 70 Ncm |
6. Weight
| Item | Type K | Type KK |
|---|---|---|
| Weight | 6 kg | 6,8 kg |
