PSM58N-F2AAGR0BN-1213 Profibus Multiturn Absolute Encoder Custom Replacement
Custom Replacement Solution
Our PSM58N-F2AAGR0BN-1213 custom replacement encoder matches the original precisely in dimensions and operating parameters. Produced in approximately 10 working days, it helps reduce downtime and procurement delays. The replacement has been successfully applied in global markets, including South America, Southeast Asia, the Middle East, and Russia, garnering favorable reviews.
Product Review
The PSM58N-F2AAGR0BN-1213 provides accurate absolute position feedback through its 30-bit multiturn design. It supports Profibus Class 1 and Class 2 modes, offering scalable resolution, programmable limit switches, speed transfer, and commissioning mode. The recessed hollow shaft and torque rest enable secure installation and reliable operation in industrial environments.
Replacement model image below.
Teknik Veriler
| Specification Category | Parametre | Detaylar |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Device type | Multiturn absolute rotary encoder | |
| Electrical specifications | Operating voltage (UB) | 10 … 30 V DC |
| No-load supply current (I0) | max. 230 mA at 10 V DCmax. 100 mA at 24 V DC | |
| Power consumption (PN) | max. 2.5 W | |
| Time delay before availability (tv) | < 1000 ms | |
| Linearity | ± 2 LSB (16 Bit)± 1 LSB (13 or 12 Bit) | |
| Output code | binary code | |
| Code course (counting direction) | programmable:- clockwise rotation, code course ascending- clockwise rotation, code course descending | |
| Interface | Interface type | PROFIBUS profile: HSB-448 |
| Resolution | Single turn: up to 16 BitMultiturn: 14 BitOverall resolution: up to 30 Bit | |
| Transfer rate | 0.030…12.0 MBit/s | |
| Connection | in movable housing, using cover | |
| Standard conformity | Degree of protection | DIN EN 60529: IP65IP65 (with minimum shaft seal) |
| Climatic testing | DIN EN 60068-3-5, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27: 100 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6: 10 g ... 2000 Hz |
Ambient Conditions
| Parametre | Detaylar |
|---|---|
| Operating temperature | -40 … 85 °C (-40 … 185 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Parametre | Detaylar |
|---|---|
| Material | Combination 1:housing: powder coated aluminiumflange: stainless steelshaft: stainless steelCombination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 600 g (combination 1)approx. 1200 g (combination 2) |
| Rotational speed | max. 12000 min⁻¹ |
| Moment of inertia | 30 g·cm² |
| Starting torque | ≤ 3 N·cm (version without shaft seal) |
| Tightening torque, fastening screws | max. 1.18 Nm |
| Shaft offset | Axial offset: ± 0.9°Radial offset:- static: ± 0.3 mm, dynamic: ± 0.1 mm- static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Dimensions | Length: 98 mmDiameter: 65 mm |
Approvals and Certificates
| Certification | Detaylar |
|---|---|
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
