For the CRF65-4096G4096E15, we offer a custom-engineered replacement that mirrors the original SSI encoder in all operational and mechanical aspects. This includes the complete replication of the encoder’s resolution settings, SSI communication protocol, housing dimensions, and installation features. The product is designed to eliminate issues related to discontinued supply or long procurement cycles. With exact 1:1 matching, users can install the replacement directly without system adjustments, ensuring continuous and reliable machine performance.
The custom solution has gained strong acceptance in international markets such as Russia, Indonesia, the Middle East, Brazil, Southeast Asia, and Ukraine. Clients often highlight its durability, stable feedback accuracy, and competitive lead time of 15 working days. These advantages make it an effective and economical alternative for maintaining industrial systems that rely on precise absolute encoder feedback.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
