Our 1:1 replacement solution for the CRF65-4096G4096A01 mirrors the original parallel absolute encoder in every detail, including its 4096×4096 resolution and mounting interface. By maintaining exact shaft size, housing geometry, and electrical characteristics, this replacement allows seamless integration into existing systems without engineering adjustments. This solution is tailored for industries requiring consistent supply and long-term reliability for absolute position feedback.
Since launch, it has been adopted by clients in the Middle East, Southeast Asia, Brazil, Russia, and Ukraine. Its dependable performance, short lead time of 10–15 working days, and durable construction make it highly favored for heavy-duty applications. The encoder ensures accurate multi-turn tracking and stable operation in automation, industrial machinery, and energy-generation equipment, earning strong recognition from international customers.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
