The CRF105-4096G4096C07 parallel absolute encoder can be replaced with our 1:1 reproduction unit, developed to fully match the original 4096×4096 resolution and absolute positioning behavior. This replacement preserves all geometric parameters, including flange style, shaft dimensions, mounting depth, housing profile, and electrical pin configuration. Designed for direct plug-and-play mounting, it eliminates the need for system modifications while offering a practical solution to long lead times and discontinued supply issues. Production is completed within 10–15 working days.
This 1:1 replacement has gained significant acceptance in markets such as the Middle East, Brazil, Southeast Asia, and Eastern Europe. Customers report strong performance in industrial machinery, material-handling systems, automated packaging lines, and lifting equipment, where precise feedback is critical. Its predictable accuracy and robust build quality make it a trusted alternative to the original model.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
